Airprint Enabled Printers List - Print Wirelessly from your iPad, iPhone, or iPod Touch

Courtesy of Apple

Airprint is Apple's solution for true, wireless printing right from your iPad, iPhone, or iPod Touch.  To print using  Airprint, your device must be running iOS 4.2 or later.  Currently Apple offers Airprint on a range of popular wireless HP printers, see the:
Airprint compatible printers list 

Joining your network is easy, no driver installation is necessary, just tap print, choose your printer, then print.  It's really that simple.   Do you use Airprint? which is your favorite Airprint enabled printer?

Read more »

How to Save Your iPod Touch SHSH Blobs Using RedSnow (Windows)

These are instructions on how to backup and save your iPod Touch SHSH Blobs to Cydia using RedSn0w for Windows.

Step One
Create a folder on your desktop called Pwnage

Download RedSn0w from 0.9.9b1 here and place it in the Pwnage folder.

Extract the RedSn0w zip file into the same folder.


Step Two
Launch the redsn0w application from the redsn0w folder we just extracted.

**Windows 7 users should run the redsn0w executable mode as an administrator in Windows Vista compatibility mode. You can do this by right clicking the executable and selecting Properties from the contextual menu.


Step Three
Once RedSn0w opens click the Extras button


Step Four
Click the SHSH blobs button from the Extras menu.


Step Five
Click the Fetch button to fetch the SHSH blobs on your device and send them to the Cydia server for storage.


Step Six
Please plug your iPod into the computer and make sure its OFF then click the Next button


Step Seven
RedSn0w will now guide you through the steps to get into DFU mode.


Hold down both the Home button and the Power button for 10 seconds.


Release the Power button and continue holding the Home button until RedSn0w detects the device.


Step Eight
Your iPod will now reboot


Step Nine
RedSn0w will then begin fetch the SHSH blobs from your device and submit them to Cydia.


Step Ten
Once this is complete you will be notified that your submission was a success. Click the Back button to return to RedSn0w.


Step Eleven
Click the SHSH blobs button and then click the Query button to make sure Cydia has your blobs saved.


Step Twelve
Enter * into the ECID textfield and click OK to check all your devices.


Step Thirteen
RedSn0w will now query Cydia and display the list of stored blobs.





Important:
RedSn0w also saves your blobs in a plist located within the RedSn0w folder. We would recommend keeping these for added safety.

Read more »

How to Save Your iPod Touch SHSH Blobs Using RedSnow (Mac)

These are instructions on how to backup and save your SHSH Blobs to Cydia using RedSn0w for Mac.

Step One
Create a folder on your desktop called Pwnage

Download RedSn0w from 0.9.9b1 here and place it in the Pwnage folder.

Extract the RedSn0w zip file by double clicking it.


Step Two
Launch the redsn0w application from the redsn0w folder we just extracted.


Step Three
Once RedSn0w opens click the Extras button


Step Four
Click the SHSH blobs button from the Extras menu.


Step Five
Click the Fetch button to fetch the SHSH blobs on your device and send them to the Cydia server for storage.


Step Six
Please plug your iPod into the computer and make sure its OFF then click the Next button


Step Seven
RedSn0w will now guide you through the steps to get into DFU mode.


Hold down both the Home button and the Power button for 10 seconds.


Release the Power button and continue holding the Home button until RedSn0w detects the device.


Step Eight
Your iPod will now reboot


Step Nine
RedSn0w will then begin fetch the SHSH blobs from your device and submit them to Cydia.


Step Ten
Once this is complete you will be notified that your submission was a success. Click the Back button to return to RedSn0w.


Step Eleven
Click the SHSH blobs button and then click the Query button to make sure Cydia has your blobs saved.


Step Twelve
Enter * into the ECID textfield and click OK to check all your devices.


Step Thirteen
RedSn0w will now query Cydia and display the list of stored blobs.




Important:
RedSn0w also saves your blobs in a plist located within the RedSn0w folder. We would recommend keeping these for added safety.

Read more »

How to Jailbreak Your iPod Touch 3G Using RedSn0w (Windows) [5.0b4]

These are instructions on how to jailbreak your iPod touch 3G on the 5.0b4 firmware using RedSn0w for Windows. Since iOS 5.0 has not yet been released these are instructions for developers only. This procedure will not hacktivate so you must have your UDID registered with a developer, and as of now the jailbreak is tethered.

Step One
Create a folder on your desktop called Pwnage

Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 5.0 firmware from the iOS Dev Center and place it in the same folder.

5.0b4 (3G): iPod3,1_5.0_9A5274d_Restore.ipsw

Extract the RedSn0w zip file into the same folder.


Step Two
Connect your iPod touch to the computer and launch iTunes.


Select your iPod touch from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPod touch.


Navigate to the Pwnage folder on your desktop and select the 5.0 firmware ipsw. Click the Choose button to continue.


Step Three
Once iTunes has finished updating your iPod touch to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.


**Windows 7 users may need to run RedSn0w in Vista Compatibility mode. You can do this by right clicking the executable and selecting Properties from the contextual menu.

Step Four
Once RedSn0w opens click the Browse button


Step Five
Select the 5.0 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.


Step Six
Once the firmware has been verified click the Next button to continue.


Step Seven
RedSn0w will now prepare the jailbreak data


Step Eight
From this window you can select the jailbreak options you would like.

Make sure Cydia is selected and click the Next button to continue.


Step Nine
Please plug your iPod touch into the computer and make sure its OFF then click the Next button


Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.


Hold down both the Home button and the Power button for 10 seconds.


Release the Power button and continue holding the Home button until RedSn0w detects the device.


Step Eleven
Your iPod touch will now reboot


Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.


Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPod touch finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.



BOOT TETHERED:
Since this is a tethered jailbreak you must use Redsn0w to help you boot back into your jailbroken device if its powered off for any reason. Simply connect your iPod touch to the computer, launch RedSn0w, select Just boot tethered right now from the options window and click Next to have RedSn0w boot your device.



*As usual a big thanks to the iPhone Dev-Team and Geohot for their hard work and contribution to the iPhone community.

**Windows 7 users can try running RedSn0w as an administrator in Windows Vista or XP compatibility mode if you experience any difficulties.

Read more »